In the case of a home sale, the home should be as clean as can be, as if the owner/seller is expecting to host a party.
Maintenance is often overlooked when buying a vacuum cleaner, but it’s much easier to clean the Blade 4’s brush bar than many other models..Step 3: Cut Away Tangled Hair Or Carpet Fibres.
Now it’s time to cut away hair and other fibres that have become caught around the brush bar.. Slide the scissors along the groove in the brush bar, as this makes it easier to get the scissors underneath the fibres.Be careful not to cut any of the bristles on the brush, as this could affect performance.. Vax doesn’t recommend using water to clean the brush bar.Instead, just cut caught fibres and use a dry cloth to remove debris build-up..
Step 4: Wipe The Floorhead Interior.With the brush bar removed, this is a good time to clean inside the floorhead itself.
Use a soft, dry cloth to wipe down the inside to remove any loose debris.
Do not use water for this.. You should also check the air outlet in the floorhead for any blockages or clogging.Step 2: Prepare Your Vacuum.
Whenever you’re performing maintenance on a vacuum cleaner, it’s vital to check that the machine isn’t plugged in.Trying to remove the battery while the charger is still attached could risk a serious electric shock.. We also recommend detaching the wand and any tools from the Dyson V10 at this point.
It’s much easier to replace the battery when you’re only dealing with the main body..Step 3: Unscrew And Remove The Old Battery.
(Editor: Stackable Kettles)